POWER UNIT FOR DOCK LEVELER
Product Description
This power unit is specially designed for hydraulic dock leveller, Hydraulic Power Unit For Warehousing,which provides lifting function for dock leveller.Closed Center Hydraulic Valve, The action sequence of main board and lip plate is controlled by the sequence valve.Energy Hydraulic Valve Parts.
Model Specifications
Type 型号 | Motor 电机 | Pump Displacemen t 泵排量(cc/r) | Tank Capacit y 油箱容积(L) | Pressure 压力 (MPa) | Mounting 安装方式 | Oil Port 油口尺寸 | Solenoid Vavlve 电磁阀 |
HPU1-32HKDIBHCEG(Y)D | AC380V 0.75Kw 1450rpm 50Hz | 2.1 | 5 | 14 | Horizontal 卧式 | G3/8" (可定制OR CUSTOMIZE ) | DC24V |
HPU1-32HKDKBHCDH(Y)D | 2.6 | 6 | 12.5 | ||||
HPU1-32HLDLBHCEH(Y)D | AC380V 1.1Kw 1450rpm 50Hz | 3.2 | 6 | 14 |
Special Notes
1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.
2、 If you need manual oil discharge device for emergency , please specify when ordering.
3、 This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4、 Before installation, ensure that the hydraulic components such as the oil cylinder,oil pip and joints are clean and free from any impurities.
5、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
6、 This hydraulic power unit is suitable for Horizontal installation.
7、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
8、 The hydraulic oil should be replaced after the first 100 hours* use of the system, and change the oil every 3,000 hours after that.
9、Air Operated Hydraulic Valve
Product Categories : Old Products